BDP Type (Round Shell)

REQUEST A QUOTE PREVNEXT
FEATURES
Introduction
The capacitor are non-inductively wound with a metallized polyester film dielectric/electrode encapsulated in flame retardant(UL 94V-0) plastic case(PBT) and epoxy resin and seal.

Used in fans, air-conditioners, refrigerators, Power Systems (UPS), office equipment, mercury lamps, fluorescent lamps and business machines.

Leads Type
P：UL 1015 or UL1007 stranded PVC insulation wire.

Specification
◎Base Specification
  • IEC60252-1:2001: S3 Used for AC motor application.
  • Standard(s) for Safety: UL 810 – Capacitors CSA C22.2, for Power Factor Correction.
  • JIS C 4908: Used for electrical apparatus.
  • CNS 4327: Used for electrical apparatus.


Reference data
◎Climate Category: In accordance with IEC60068-2-3
  • H=Minimum Limit Temperature: -25℃
  • S=Maximum Limit Temperature: +85℃
  • F=Humidity Category: Average relative humidity≦75,
    95﹪for 30 days per year, continuously;
    85﹪for the remaining days, occasionally

◎Rated Voltage: 250, 300, 350, 400, 450 Vac

◎Capacitance Range: 3μ F ~ 50 μF

◎Capacitance Tolerance: U(- 5%~ +10%), J ( ± 5 % ), K (± 10 % )

◎Withstand Voltage:
  • Between Terminals: R.V. ×√2× 175% for 1 minuite（VDC）
  • Between Terminals and Case: 2× rated voltage ＋1,000V(1500V Min) for 60s
    This test occasional self-healing breakdown is allowed.

◎Dissipation Factor: 0.1﹪at 200V.AC, 60Hz and 25℃

◎Insulation Resistance:
  • Between Terminals: Insulation resistance：more than 1,000M ohm μF
  • Between Terminals and Case: ≧10 MΩ Measured at 100V.AC, 60s. And 25℃